Quick Charge Battery Charger 16 Volt - 25 Amp

For 16 Volt batteries at a 25 amp charge rate. Charges wet cell, sealed, starting , deep cycle and AGM batteries. Charger is Designed For Racing Competition using 16 volt batteries

QAGM16V25A $269.99 Free Shipping By Ground Only

For Racers - Design To Use With	Height	Width	Depth	Weight
TurboStart S16V, S16A, 16V24, 16V324	6	10	8	20

The QAGM16V25 16 volt chargers are designed for general purpose deep cycle, and starting batteries. They are an electronically controlled two stage charger. The first stage brings the batteries to the gassing threshold where an electronic timer starts. The batteries are then gassed for three hours. At the end of three hours, batteries are dropped into a low float mode where the charge is maintained in the batteries indefinitely. Finish current is below 1 amp. The QAGM16V60A charger brings the battery up to the float voltage which triggers a three hour timmer. Then the battery is allowed to gas to a maximum of 2.4 volts per cell before dropping into a low volt mode of 2.26 volts per cell where the charge is maintained in the batteries indefinitely. The finish current is below 1 amp. The QAGM1216V25 16 volt charger is designed for use with the TurboStart 16 Volt AGM Series sealed, maintenance free battery types (battery part# S16V, S16A) and the TurboStart 16 volt dry charged acid type batteries (battery part# 16V24, 16V324). Features: o No Power in the charge leads until connected to the batteries o No Arcing at the charge leads even when shorted together o Polarity protection to prevent from charging batteries incorrectly o No overcharging of batteries. Voltage limited o Current limited to protect against DC overloads o 100% copper transformer & heavy duty rectifiers o Heavy Duty 200 amp clamps connect to battery o Ammeter shows actual current flow, no guessing with LED's o 3 Year Warranty